Utility Trailers

H&H Solid Side Tilt Bed Utility Trailer

So you love the convenience of a tilt trailer but you would also like a solid box for hauling lose dirt, sand, gravel or rubbish now and then? No problem! The H&H solid sided utility trailer with standard tilt chassis design is for you. Or, H&H will also convert your tiltbed trailer to a more stable non-tiltbed trailer at no extra charge!

Four wheelers, lawn mowers, golf cars and many other wheeled items fit in this trailer like a hand in a glove! We also offer this trailer in lengths from 8-12 feet (10 foot model featured here) and deck widths of 60 inches (featured here), 76" and 82" so there’s most definitely a model that will fit your hauling needs! This unit has the standard 15" tall 12 gauge steel front and sides. Optional 24" or 34" tall 12 gauge steel sides are available as well! This solid side tiltbed utility trailer is shown with our option silver wheels.
 

Here is a photo of our SS flatbed utility trailer with the optional 24” tall sides and silver wheels.
 

This is our SS flatbed utility trailer with the optional 34” tall sides. Our optional ramp gate, tie rail and silver wheels were also added to this trailer. A great feature of the ramp gate is that it can be laid flat on the floor to eliminate wind drag when pulling the trailer and H&H is the only trailer company that offers it!

This 34” sided utility trailer also has our optional 6” tie rail option. This option can be added to the top of any of our solid side utility trailers. The tie rail is made of tubular steel uprights capped by a sturdy section of 2" channel steel. It’s a great place to secure taller items, such as refrigerators or tall cabinets with rope or straps during transport. It is a VERY sturdy addition to any utility trailer.
 

One of the standard features on our solid side flatbed utility trailers is this swivel up jack. With the pull of a pin this 2,000lb rated jack can be swung up out of the way or lowered for use. It is a very handy feature.
 

Moving around to the rear of the utility trailer you can see what the tilt bed trailer looks like when the tilt bed is in the latched, or locked, position. You can also see the treated wood flooring, one of the steel fenders and ST205 tires, and the left taillight. If you look closely you will notice the three d-rings on the right trailer wall. There are three more d-rings located across from these on the left trailer wall too.
 

Taking a closer look at the fender and wheel you can see that the full steel fender is protected from rocks and other road debris by aluminum diamond plate. This is a standard feature on our flatbed utility trailers! The tires are ST205 and are mounted on 5 x 4 ¾ bolt pattern white spoke wheels. Again, this trailer was ordered with our optional silver wheels.
 

All H&H wood floor trailers also receive no less than two or more rows of bolts (two bolts per board, per row) to hold the floor in. NOBODY does this on a trailer of this type but H&H. Even this small utility trailer has 2 rows of bolts! Counting the end caps this trailer has 50 bolts just holding the #1 grade ACQ treated floor in place!
 

So you love what you have heard or read about our solid side single axle utility trailers but you don’t think it is stout enough to handle what you are going to do with it huh? Well we definitely have a solution for you!

That solution would be our solid side tandem axle utility trailers! When it comes to our solid side series this utility trailer is the top of the line. It has a 12 gauge solid steel chassis and box, fully wrapped channel steel tongue (the tongue and frame have a 10 year limited warranty!), 5,000lb set back jack, full steel fenders with aluminum diamond plate shields and inner bracing, an ACQ treated wood floor (with a lifetime rot warranty from the manufacturer!), two 3,500lb axles, four white spoke wheels and ST205-15C rated tires, a full lighting package, and the strongest steel mesh ramp gate (this trailer has our optional split ramp gate) on the market. ALL STANDARD!!!
 

We also offer this trailer in lengths from 8-12 feet (10 foot model featured here) and deck widths of 60 inches (featured here), 76" and 82" so there’s most definitely a model that will fit your hauling needs! This unit has the standard 15" tall 12 gauge steel front and sides. Optional 24" or 34" tall 12 gauge steel sides are available as well!